Excel International
Kandivali West, Mumbai, Maharashtra
GST No. 27AGMPB9165F1Z8
TrustSEAL Verified
Call 08048957044 87% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 25 Kg |
| Type | LDPE Wax |
| Form | Powder |
| Melting Point | 106 degree |
| Grade Standard | Industrial Grade |
| Packaging Type | Bag |
| Packaging Size | 25 Kg |
| Country of Origin | USA |
| Brand | Imported |
| Product Type | Honeywell AC 6A Polyethylene Wax |
| Manufacturer / Brand | Honeywell International Inc. |
| Wax Category | Low-density polyethylene (LDPE) homopolymer wax (Non-oxidized PE wax) |
| Physical Form | Powder |
| Drop Point – Mettler | Approx. 106 °C Indicates good thermal stability in processing systems |
| Hardness | Approx. 4.0 Provides controlled surface protection without excessive brittleness |
| Viscosity @ 140 °C | Approx. 375 cps Supports viscosity control and flow modification |
| Density | Approx. 0.92 g/cm³ |
| Acid Number | Nil Confirms non-oxidized, chemically neutral structure |
| Surface Performance | Improves rub, mar and abrasion resistance, reduces coefficient of friction (COF) |
| Dispersion Behaviour | Excellent dispersion in solvent-borne and melt systems suitable for inks, coatings and masterbatches |
| Compatibility | Compatible with paraffin wax and microcrystalline wax, hydrocarbon oils and polybutene, etc |
| Functional Roles | Surface modifier, Viscosity diluent, Paraffin crystal nucleator, Gellant for hydrocarbon oils, etc. |
| Application Suitability | Solvent-borne coatings, heatset and liquid solvent-borne inks, hot-melt adhesives, candle wax blends |
| Storage & Handling | Store in a cool, dry place away from moisture and direct heat |
Honeywell AC 6A is a low-density polyethylene (LDPE) homopolymer wax supplied in powder form, engineered for applications requiring surface protection, controlled slip, dispersion efficiency and viscosity modification. Manufactured by Honeywell International Inc., this grade is widely used in coatings, inks, adhesives, wax blends and specialty industrial formulations.
AC 6A is a non-oxidized PE wax (acid number: nil), making it particularly suitable for systems where chemical neutrality, compatibility and thermal stability are essential.
Honeywell AC 6A is valued for its ability to:
Improve rub, mar and abrasion resistance
Reduce coefficient of friction (COF) for smoother surfaces
Enhance surface slip without compromising clarity
Act as a viscosity modifier and flow controller
Support consistent dispersion of pigments and fillers
Its powdered LDPE structure allows easy incorporation into both solvent-based and melt systems.
Coatings & Inks
Solvent-borne coatings
Heatset and liquid solvent-borne inks
Surface protection and slip additives
Adhesives & HMAs
Hot-melt adhesives (HMA) as a viscosity diluent
Partial replacement for Fischer–Tropsch (FT) wax without loss of formulation performance
Wax & Candle Applications
Paraffin crystal nucleator in candle wax blends
Improves structure and consistency in wax systems
Cable & Electrical
Cable flooding compounds (used with polybutene)
Moisture protection and flow control
Plastics & Masterbatches
Dispersing agent in colour masterbatch formulations
Improves pigment wet-out and uniformity
Other Industrial Uses
Gellant for hydrocarbon oils
Specialty wax and polymer compounding
Compared to oxidized PE waxes:
Neutral chemistry (nil acid number)
Better compatibility in non-polar systems
Lower risk of interaction with sensitive formulations
Compared to FT wax:
Cost-effective substitution in adhesive systems
Comparable performance in viscosity and surface control
FDA indirect food contact approvals (where applicable in formulations)
Recognised by Plastic Pipe Institute / NSF (application dependent)
Powder form ensures easy metering and dispersion
Supplied in powder form
Suitable for dry blending and melt processing
Compatible with paraffin wax, PE waxes, polymers and hydrocarbon oils
Excel International supplies authentic Honeywell AC-series PE waxes, including AC 6A, ensuring correct grade sourcing, consistent quality and dependable availability. We support buyers who require application-matched PE wax solutions, not generic substitutes.
Buyers choose us for:
Genuine Honeywell material
Technical understanding of coatings, inks and wax systems
Bulk supply
Reliable commercial support
Additional Information:
Product Details:
| Minimum Order Quantity | 25 Kg |
| Type | Oxidized PE Wax |
| Form | Flakes |
| Melting Point | 100 ± 1 °C Provides stable performance during processing |
| Grade Standard | Industrial Grade |
| Packaging Type | Bag |
| Application | Rubber, Paper Coating, PVC Processing, Adhesive, Masterbatch, Hot Melt Ink |
| Packaging Size | 25 Kg |
| Usage/Application | PVC Pipes, PVC Stabilizer, PVC One Pack, Master Batch, Coating |
| Country of Origin | USA |
| Brand | Indian & Imported |
| Product Type | Honeywell AC 629A Polyethylene Wax |
| Manufacturer / Brand | Honeywell International Inc. |
| Wax Category | Oxidized polyethylene (PE) wax |
| Physical Form | Fine powder |
| Drop Melting Point (ASTM D3954) | 100 ± 1 °C Provides stable performance during processing |
| Needle Penetration @ 23 °C, 5 sec (ASTM D1321) | 4 – 8 dmm Indicates moderate hardness with good surface lubrication |
| Density (ASTM C693) | 0.93 – 0.94 g/cm³ |
| Acid Number (ASTM D1386) | 15 ± 1 mg KOH/g Confirms oxidized structure and polarity for resin compatibility |
| Colour (Hunter Lab, ASTM E313) | White Suitable for light and colour-sensitive formulations |
| Hardness & Surface Properties | Moderate hardness Improves slip, mar resistance and abrasion resistance |
| Dispersion Behaviour | Excellent dispersion in polymer, coating & ink systems Suitable for dry blending & melt processing |
| Compatibility | Compatible with PVC, polyolefins, coatings, inks, rubber compounds and pigments |
| Thermal Stability | Stable under standard polymer and coating processing temperatures |
Honeywell AC 629A is a high-performance oxidized polyethylene (PE) wax manufactured by Honeywell International Inc., engineered for applications that require controlled lubrication, surface modification and compatibility with polar systems. Supplied in powder form, this grade is widely used as a processing aid and performance additive in plastics, coatings, inks and rubber formulations.
AC 629A offers a balanced combination of hardness, polarity and dispersion, making it suitable for applications where moderate slip, good abrasion resistance and uniform surface finish are required without excessive stiffness.
Honeywell AC 629A PE wax is valued for:
Controlled hardness with moderate penetration
Good slip and lubrication performance
Oxidized structure providing polarity and compatibility
Clean white appearance suitable for light-coloured formulations
Easy dispersion in polymer and coating systems
Its oxidation level allows it to interact effectively with polar resins, pigments and fillers, improving overall formulation stability.
Compared to non-oxidized PE waxes, AC 629A:
Provides better adhesion and compatibility
Improves surface smoothness and gloss control
Enhances abrasion and scratch resistance
Supports consistent processing behaviour
It is often selected when surface performance and formulation compatibility are more critical than extreme hardness.
Plastics & Polymer Processing
PVC processing (internal and external lubrication)
Polymer compounding and masterbatches
Injection moulding and extrusion
Coatings & Inks
Industrial and decorative coatings
Printing inks
Surface slip and mar-resistance additives
Rubber & Industrial Uses
Rubber compounding
Processing aids and release agents
Polishes and surface care products
Supplied in powder form for easy metering and dispersion
Suitable for dry blending and melt processing
Compatible with a wide range of polymers and resins
Excel International supplies authentic Honeywell AC-series polyethylene waxes, including AC 629A, ensuring correct grade sourcing, consistent quality and dependable supply. We assist buyers in selecting the right PE wax based on processing conditions and end-use performance, not just basic specifications.
Buyers choose us for:
Genuine Honeywell material
Stable batch quality
Bulk supply capability
Technical understanding of PE wax applications
Additional Information:
Product Details:
| Minimum Order Quantity | 25 Kg |
| Type | Oxidized PE Wax |
| Form | Powder |
| Melting Point | 100-105 °C |
| Grade Standard | Industrial Grade |
| Packaging Type | Bag |
| Packaging Size | 25 Kg |
| Brand | Mitsui |
| Product Type | Hi-Wax 420P Polyethylene Wax |
| Manufacturer / Brand | Mitsui Chemicals Inc |
| Wax Category | Polyethylene (PE) wax (Industrial processing & surface-modification grade) |
| Physical Form | Solid / powder form (grade-dependent supply) |
| Appearance | Uniform, clean appearance free from visible contamination |
| Molecular Weight (Approx.) | Medium molecular weight PE wax designed for balanced hardness and dispersion |
| Density | Approx. 0.93 – 0.95 g/cm³ |
| Acid Value | Low acid value (Indicates neutral to mildly polar behaviour depending on formulation) |
| Hardness Characteristics | Medium hardness Provides effective lubrication and surface protection |
| Slip & Surface Properties | Improves surface smoothness enhances mar and abrasion resistance, Reduces coefficient of friction |
| Dispersion Behaviour | Good dispersion in polymer melts and coating systems, suitable for dry blending and melt processing |
| Thermal Stability | Stable under normal polymer & coating processing temperatures |
| Compatibility | Compatible with PVC and polyolefin systems, coatings and printing inks, pigments and fillers |
| Functional Role | Processing aid, lubricant, surface modifier, slip and abrasion-resistance additive |
| Application Suitability | PVC processing (internal & external lubrication), polymer compounding and masterbatches, and more |
| Storage & Handling | Store in a cool, dry place, protect from moisture and direct heat |
| Country Origin | Japan |
Hi-Wax 420P is a high-performance polyethylene (PE) wax from Mitsui Chemicals, developed for applications that require controlled hardness, smooth dispersion and reliable surface modification. This grade is widely used as a processing aid, lubricant and performance additive in plastics, coatings, inks and industrial formulations.
Hi-Wax 420P is designed to deliver balanced slip, abrasion resistance and flow control, making it suitable for both polymer processing and surface-critical applications where consistent performance is essential.
Hi-Wax 420P is valued for:
Controlled hardness for effective lubrication
Good dispersion in polymer and coating systems
Improved surface smoothness and scratch resistance
Stable performance during processing
Compatibility with a wide range of resins and additives
Its polyethylene structure helps improve processing efficiency and finished-product quality without negatively affecting formulation stability.
Compared to conventional waxes, Hi-Wax 420P:
Improves surface slip and reduces friction
Enhances abrasion and mar resistance
Supports consistent melt flow and processing
Performs reliably across different polymer systems
It is commonly selected when surface performance and processing control are required together.
Plastics & Polymer Processing
PVC processing (internal and external lubrication)
Polymer compounding and masterbatches
Injection moulding and extrusion
Coatings & Inks
Industrial and decorative coatings
Printing inks
Slip and surface-protection additives
Other Industrial Uses
Rubber compounding
Adhesives and sealants
Polishes and surface care products
Industrial wax blends
Supplied in industrial solid / powder form (grade dependent)
Suitable for dry blending and melt processing
Compatible with PE waxes, paraffin waxes and common resin systems
Excel International supplies authentic Mitsui Hi-Wax grades, including 420P, with a focus on correct grade selection, consistent quality and dependable supply. We support buyers who need reliable PE wax performance, not generic substitutes.
Buyers choose us for:
Genuine Mitsui material
Stable batch quality
Bulk availability
Practical understanding of PE wax applications
Additional Information:
Product Details:
| Minimum Order Quantity | 25 Kg |
| Type | Oxidized PE Wax |
| Form | Powder |
| Melting Point | 110-115 Degree |
| Packaging Size | 25 Kgs |
| Packaging Type | Bag |
| Molecular Weight | 1000-1500 |
| Brand | Mitsui |
| Product Type | HI-WAX 210P Polyethylene Wax |
| Manufacturer / Brand | Mitsui Chemicals |
| Wax Category | Polyethylene (PE) wax (Non-oxidized grade) |
| Physical Form | Solid / powder form (as supplied) |
| Appearance | Clean, uniform appearance, free from visible impurities |
| Chemical Nature | Non-oxidized polyethylene wax, neutral chemistry |
| Density | Approx. 0.92 – 0.94 g/cm³ |
| Acid Value | Nil / very low, suitable for non-polar and sensitive formulations |
| Hardness Characteristics | Relatively soft to medium hardness, provides smooth lubrication without excessive surface stiffness |
| Relatively soft to medium hardness Provides smooth lubrication without excessive surface stiffness | Reduces coefficient of friction (COF), Improves surface smoothness and flow |
| Dispersion Behaviour | Easy dispersion in polymer melts and coating systems, suitable for dry blending and melt processing |
| Thermal Stability | Stable under standard polymer and coating processing temperatures |
| Compatibility | PVC and polyolefin systems, paraffin and other PE waxes, coatings and printing inks, and more |
| Functional Role | Processing aid, lubricant, slip additive, surface modifier |
| Application Suitability | PVC processing (internal & external lubrication) Polymer compounding and masterbatches, etc. |
| Storage & Handling | Store in a cool, dry place, protect from moisture and direct heat |
| Country Origin | Japan |
HI-WAX 210P is a high-quality polyethylene (PE) wax manufactured by Mitsui Chemicals, designed for applications requiring smooth lubrication, easy dispersion and controlled surface modification. This grade is widely used as a processing aid and slip additive in plastics, coatings, inks and industrial formulations.
HI-WAX 210P belongs to the non-oxidized PE wax category, offering neutral chemistry and stable processing behaviour, making it suitable for formulations where chemical reactivity must be minimal and consistent surface performance is required.
HI-WAX 210P is valued for:
Smooth internal and external lubrication
Reduced coefficient of friction (COF)
Improved surface smoothness and flow
Easy dispersion in polymer and coating systems
Stable behaviour during processing
Its controlled hardness allows it to deliver effective slip and processing efficiency without excessive stiffness.
Compared to harder PE wax grades, HI-WAX 210P:
Offers softer lubrication
Disperses more easily at lower processing temperatures
Improves flow without over-hardening surfaces
It is commonly selected for formulations that require processing ease and surface smoothness.
Plastics & Polymer Processing
PVC processing (internal & external lubrication)
Polymer compounding and masterbatches
Injection moulding and extrusion
Coatings & Inks
Industrial and decorative coatings
Printing inks
Slip and surface-protection additives
Other Industrial Uses
Rubber compounding
Adhesives and sealants
Polishes and surface care products
Industrial wax blends
Supplied in solid or powder form (as per grade availability)
Suitable for dry blending and melt processing
Compatible with PE waxes, paraffin waxes and common resin systems
Excel International supplies authentic Mitsui HI-WAX grades, including 210P, focusing on correct grade selection, consistent quality and dependable supply. We help buyers choose the right PE wax based on application performance, not trial and error.
Buyers choose us for:
Genuine Mitsui material
Stable batch quality
Bulk availability
Practical understanding of PE wax applications
Additional Information:
Product Details:
| Minimum Order Quantity | 25 Kg |
| Type | Non-oxidized / low-polarity grade |
| Form | Powder |
| Melting Point | 105-110 °C |
| Grade Standard | Industrial Grade |
| Packaging Type | Box |
| Packaging Size | 25 Kg |
| Usage/Application | Coating, Stationary Making |
| Brand | Mitsui |
| Product Type | HI-WAX 220P Polyethylene Wax |
| Manufacturer / Brand | Mitsui Chemicals |
| Wax Category | Polyethylene (PE) wax (Non-oxidized / low-polarity grade) |
| Chemical Nature | Polyethylene wax produced via controlled polymerization, neutral chemistry |
| Physical Form | Solid / powder form (industrial grade) |
| Appearance | Clean, uniform appearance, free from visible impurities |
| Molecular Weight Range | Medium molecular weight PE wax, optimized for surface modification and dispersion |
| Density | Approx. 0.93 – 0.95 g/cm³ |
| Acid Value | Nil / very low, suitable for non-polar and sensitive formulations |
| Hardness Characteristics | Medium hardness, provides effective lubrication with improved surface durability |
| Slip & Surface Performance | Reduces coefficient of friction (COF), Improves surface smoothness, Enhances mar and abrasion resist |
| Dispersion Behaviour | Good dispersion in polymer melts, coatings and ink systems, pigment & filler-containing formulations |
| Thermal Stability | Stable under normal polymer processing and coating temperatures |
| Compatibility | Compatible with PVC & polyolefin systems, paraffin wax & other PE waxes, resins, pigments & fillers |
| Functional Role | Processing aid, Lubricant, Slip additive, Surface modifier |
HI-WAX 220P is a premium polyethylene (PE) wax from the globally trusted Mitsui Chemicals, developed for performance-critical industrial applications where surface quality, dispersion efficiency and processing stability are essential. This grade is widely used as a processing aid, slip additive and surface modifier in plastics, coatings, inks and specialty formulations.
Unlike commodity PE waxes, HI-WAX 220P is engineered with a controlled molecular structure, allowing it to deliver consistent lubrication, improved surface properties and reliable dispersion across a wide range of polymer and coating systems.
HI-WAX 220P is specifically selected for applications that demand:
Improved pigment wetting and dispersion, especially in inks and coatings
Enhanced surface slip and abrasion resistance
Stable processing behaviour during extrusion, compounding and coating
Better compatibility with polymers, resins and fillers
Its performance makes it suitable for buyers who need predictable results batch after batch, not trial-and-error additives.
Plastics & Polymer Processing
PVC processing (internal & external lubrication)
Polymer compounding and masterbatches
Injection moulding and extrusion
Coatings & Printing Inks
Industrial and decorative coatings
Printing inks
Slip, mar and abrasion-resistance additives
Other Industrial Uses
Rubber compounding
Adhesives and sealants
Polishes and surface care products
Specialty wax and polymer blends
HI-WAX 220P is supplied in industrial-grade solid / powder form, suitable for:
Dry blending
Melt processing
Large-scale industrial production
It blends efficiently with PE waxes, paraffin waxes and common resin systems.
Excel International supplies genuine Mitsui HI-WAX grades, including HI-WAX 220P, ensuring correct grade sourcing, consistent quality and dependable supply. We help buyers select the right PE wax for their specific application, not just a generic substitute.
Choose Excel International for:
Authentic Mitsui material
Stable industrial-grade quality
Bulk availability at competitive rates
Application-level technical understanding
Contact Excel International today for latest pricing, bulk availability and application guidance for HI-WAX 220P (Mitsui).
Request a quote now and optimise your formulation performance.
Additional Information:
Product Details:
| Minimum Order Quantity | 25 Kg |
| Type | Oxidized PE Wax |
| Form | Powder |
| Refinement | Fully Refined |
| Melting Point | 105-110 °C |
| Grade Standard | Industrial Grade |
| Packaging Type | Bag |
| Packaging Size | 50 Kg |
| Brand | Indian & Imported |
| Product Type | Oxidized Polyethylene Wax |
| Wax Category | Oxidized polyethylene (PE) wax (Polar functional wax) |
| Chemical Nature | Polyethylene wax with controlled oxidation contain polar functional group for improved compatibility |
| Physical Form | Powder / granules / flakes (as supplied) |
| Appearance / Colour | White to off-white, uniform, free-flowing material |
| Drop / Softening Point | 100-145 °C (Grade-dependent) suitable for high-temperature processing |
| Acid Value | 10-25 mg KOH/g Indicates degree of oxidation and polarity |
| Density | 0.92 – 0.96 g/cm³ |
| Hardness Characteristics | Medium to high hardness, provides effective lubrication and surface protection |
| Needle Penetration @ 25 °C | Low to medium penetration (Indicates controlled hardness and flexibility) |
| Viscosity (High-Temperature) | Stable viscosity at processing temperatures, supports smooth flow and dispersion |
| Polarity & Compatibility | Enhanced compatibility with polar resins, pigments and fillers, coatings, inks and adhesive systems |
| Dispersion Behaviour | Excellent dispersion in polymer melts, coatings and ink formulations, dry blends and masterbatches |
| Slip & Surface Properties | Reduces coefficient of friction, improves surface smoothness, enhances mar & abrasion resistance |
| Thermal Stability | Stable under extrusion, compounding and coating conditions |
| Functional Role | External lubricant, processing aid, dispersing agent, surface modifier, abrasion-resistance additive |
Oxidized Polyethylene Wax is a functional polyethylene wax modified through controlled oxidation, designed to deliver enhanced compatibility, polarity and surface performance compared to non-oxidized PE waxes. This wax is widely used as a processing aid, lubricant, dispersing agent and surface modifier across plastics, coatings, inks and various industrial formulations.
The oxidation process introduces polar functional groups, allowing the wax to interact more effectively with resins, pigments, fillers and additives, making it especially suitable for formulations where adhesion, dispersion and surface quality are critical.
Oxidized polyethylene wax offers clear performance advantages over standard PE wax:
Improved compatibility with polar systems
Better pigment wetting and dispersion
Enhanced surface adhesion and film integrity
Effective slip, lubrication and abrasion resistance
Stable processing behaviour across temperature ranges
These properties make it an essential additive in performance-driven industrial applications.
Oxidized PE wax is valued for:
Controlled lubrication (internal & external)
Reduction of coefficient of friction (COF)
Improved surface smoothness and scratch resistance
Consistent dispersion in polymer melts and liquid systems
Improved processing efficiency and flow control
Plastics & Polymer Processing
PVC processing (external lubrication)
Polymer compounding and masterbatches
Injection moulding and extrusion
Coatings & Printing Inks
Industrial and decorative coatings
Printing inks
Surface slip, mar and abrasion resistance additives
Adhesives & Sealants
Hot-melt and pressure-sensitive adhesives
Viscosity and flow control
Other Industrial Uses
Rubber compounding
Polishes and surface care products
Wax blends and specialty industrial formulations
Oxidized polyethylene wax is commonly supplied in:
Powder form
Granules / prills
Flakes
It is suitable for dry blending and melt processing, and blends well with PE waxes, paraffin waxes and resin systems.
Excel International supplies carefully selected oxidized polyethylene wax grades, matched to specific application and processing requirements. We help buyers choose the right oxidation level and performance profile, ensuring reliable results in production.
Choose Excel International for:
Consistent industrial-grade quality
Bulk availability at competitive pricing
Application-focused technical understanding
Reliable supply for Indian markets
Contact Excel International today for pricing, specifications and bulk availability of Oxidized Polyethylene Wax.
Request a quote now and optimise your formulation performance.
Additional Information:
Product Details:
| Type | Oxidized PE Wax |
| Melting Point | 95-100 °C |
| Form | Granules |
| Grade Standard | Technical Grade |
| Application | Masterbatch, Rubber, PVC Processing, Adhesive, Hot Melt Ink |
| Color | White |
| Packaging Size | 25kg |
| Packaging Type | Bag |
| Country of Origin | USA |
| Brand | Honeywell |
| Product Type | Honeywell Wax AC 617A |
| Manufacturer / Brand | Honeywell International Inc. |
| Wax Category | Oxidized polyethylene (PE) wax |
| Physical Form | Fine prills |
| DSC Peak Melting Point (ASTM D3418) | 95 ± 5 °C |
| Mettler Drop Point (ASTM D3954) | 100 ± 5 °C |
| Needle Penetration @ 23 °C, 5 sec (ASTM D1321) | 3 – 8 dmm Indicates moderate hardness and flexibility |
| Viscosity @ 149 °C (ASTM D3236) | Maximum up to 100 cps Supports easy flow and dispersion at lower processing temperatures |
| Density (ASTM C693) | 0.91 – 0.94 g/cm³ |
| Colour / Appearance | As per standard sample Uniform and clean appearance |
| Hardness & Lubrication Behaviour | Moderate hardness with good slip & lubrication properties |
| Compatibility & Dispersion | Good compatibility with PVC, polyolefins, coatings, inks and rubber compounds |
| Thermal Stability | Stable under normal polymer and coating processing conditions |
| Application Suitability | PVC processing (internal & external lubrication), polymer compounding and masterbatches and more |
| Storage & Handling | Store in a cool, dry place away from direct heat and moisture |
Honeywell Wax AC 617A is a low-melting, oxidized polyethylene (PE) wax manufactured by Honeywell International Inc., developed for applications requiring controlled lubrication, smooth dispersion and surface modification at lower processing temperatures. Supplied in fine prill form, this grade is widely used as a processing aid and surface additive in plastics, coatings, inks and rubber formulations.
Compared to higher-melting PE waxes, AC 617A offers greater flexibility, moderate hardness and easy melt flow, making it suitable for formulations where excessive hardness or high processing temperatures are not required.
Honeywell AC 617A is valued for:
Lower melting behaviour for easy incorporation
Moderate hardness with controlled penetration
Good slip and surface lubrication properties
Excellent dispersion in polymer and coating systems
Balanced polarity for compatibility with polar and non-polar formulations
These properties make AC 617A a preferred choice where smooth processing and surface finish are priorities.
Compared to grades like AC 316A, AC 617A:
Melts at lower temperatures
Is easier to process in heat-sensitive systems
Provides softer lubrication and surface feel
Is better suited for inks, coatings and flexible polymer systems
It is commonly selected when flow improvement and surface modification are more important than extreme hardness.
Plastics & Polymer Processing
PVC processing (internal and external lubrication)
Polymer compounding and masterbatches
Injection moulding and extrusion
Coatings & Inks
Printing inks
Industrial and decorative coatings
Surface slip and abrasion resistance additives
Rubber & Industrial Uses
Rubber compounding
Release agents
Processing aids
Supplied in fine prill form for uniform feeding and dispersion
Suitable for dry blending and melt processing
Compatible with a wide range of resins and polymers
Excel International supplies authentic Honeywell AC-series polyethylene waxes, including AC 617A, ensuring correct grade sourcing, consistent quality and reliable supply. We support buyers who need precise PE wax performance, not generic substitutes.
Buyers choose us for:
Genuine Honeywell material
Stable batch quality
Bulk availability
Technical understanding of PE wax applications
Product Details:
| Minimum Order Quantity | 20 Kg |
| Type | Oxidized PE Wax |
| Form | Powder |
| Melting Point | 100-105 °C |
| Grade Standard | Technical Grade |
| Packaging Type | Bag |
| Packaging Size | 20 Kg |
| Brand | Mitsui |
| Product Type | Hi-Wax 4202E |
| Manufacturer / Brand | Mitsui Chemicals Inc |
| Wax Category | Oxidized polyethylene (PE) wax |
| Physical Form | Solid (industrial grade) |
| Appearance | Normal / uniform appearance, free from visible impurities |
| Average Molecular Weight | Approx. 2,500 (Specified range: 2,200 – 3,000), Ensures predictable processing and dispersion |
| Acid Value | Approx. 17 mg KOH/g (Specified range: 14 – 20 mg KOH/g) Indicates oxidized structure and polarity |
| Hardness / Surface Behaviour | Medium hardness, provides effective slip, lubrication and abrasion resistance |
| Compatibility | Good compatibility with polar and semi-polar systems |
| Dispersion Behaviour | Disperses efficiently in melt and coating systems, supports uniform surface finish |
| Processing Stability | Stable under normal polymer and coating processing temperatures |
| Functional Role | Lubricant, processing aid, surface modifier, slip and abrasion-resistance additive |
| Application Suitability | PVC processing (internal & external lubrication), polymer compounding and masterbatches, etc. |
| Storage & Handling | Store in a cool, dry place away from direct heat and moisture |
| Country Origin | Japan |
Hi-Wax 4202E is a high-quality oxidized polyethylene (PE) wax manufactured by Mitsui Chemicals, designed for applications that require controlled molecular weight, good polarity and reliable surface performance. This grade is widely used as a processing aid, lubricant and surface modifier in plastics, coatings, inks and industrial formulations.
With a medium molecular weight range and controlled acid value, Hi-Wax 4202E offers an optimal balance between hardness, dispersion and compatibility, making it suitable for both polymer processing and surface-critical applications.
Hi-Wax 4202E is valued for:
Controlled molecular weight for predictable processing behaviour
Oxidized structure providing polarity and improved compatibility
Good slip and lubrication properties
Enhanced surface smoothness and abrasion resistance
Consistent dispersion in polymer and coating systems
Its acid value allows effective interaction with polar resins, pigments and fillers, improving formulation stability and performance.
Compared to non-oxidized PE waxes, Hi-Wax 4202E:
Disperses more easily in coatings and inks
Improves adhesion between wax and resin systems
Enhances surface finish without excessive hardness
Provides consistent processing across batches
It is often selected where surface performance and formulation compatibility are more important than extreme melting or hardness.
Plastics & Polymer Processing
PVC processing (internal and external lubrication)
Polymer compounding and masterbatches
Injection moulding and extrusion
Coatings & Inks
Industrial and decorative coatings
Printing inks
Slip, mar and abrasion resistance additives
Other Industrial Uses
Rubber compounding
Polishes and surface care products
Adhesives and sealant formulations
Industrial wax blends
Supplied in solid form suitable for industrial processing
Easy to incorporate in melt systems and dry blends
Compatible with a wide range of polymers and resins
Excel International supplies authentic Mitsui Hi-Wax grades, including 4202E, ensuring correct grade sourcing, consistent quality and dependable supply. We support buyers who require precise PE wax performance, not generic substitutes.
Buyers choose us for:
Genuine Mitsui material
Stable batch quality
Bulk availability
Technical understanding of PE wax applications
Additional Information:
Product Details:
| Type | Oxidized PE Wax |
| Form | Powder |
| Melting Point | 145 ± 5 °C (High melting stability for elevated processing temperatures) |
| Application | Masterbatch, Polish, Adhesive, PVC Processing, Hot Melt Ink, Rubber |
| Product Type | AC 316A Polyethylene Wax |
| Manufacturer / Brand | Honeywell International Inc. |
| Wax Category | Oxidized polyethylene (PE) wax |
| Viscosity @ 200 °C (ASTM D3236) | 35,000 ± 5% cps (Ensures controlled flow and dispersion) |
| Needle Penetration (ASTM D1321) | < 0.5 dmm @ 23 °C (5 seconds) Indicates extremely high hardness |
| Acid Number (mg KOH/g) | 16 ± 2 Provides controlled polarity and compatibility with polar systems |
| Hardness Characteristics | Very high hardness, excellent abrasion and scratch resistance |
| Slip & Surface Properties | Improves slip, mar resistance and surface finish, reduces blocking and friction |
| Compatibility & Dispersion | Excellent compatibility with PVC, polyolefins, coatings, inks and rubber compounds |
| Thermal Stability | Stable at high processing temperatures, suitable for extrusion, injection moulding and compounding |
AC 316A is a high-performance oxidized polyethylene (PE) wax manufactured by Honeywell International Inc., designed for applications requiring high hardness, excellent slip, abrasion resistance and controlled polarity. Supplied in fine powder form, this grade is widely used as a processing aid, lubricant and performance modifier in plastics, coatings, inks and rubber formulations.
With its high melting behaviour, extremely low penetration and controlled acid value, AC 316A delivers reliable performance in demanding processing environments where conventional waxes fail to provide sufficient hardness or surface protection.
AC 316A polyethylene wax is valued for:
Very high hardness due to ultra-low penetration
High melting stability suitable for elevated processing temperatures
Controlled polarity from oxidation, improving compatibility with polar systems
Excellent surface slip and abrasion resistance
Consistent viscosity behaviour at high temperatures
These properties make it suitable for precision formulation work, not commodity wax replacement.
Compared to paraffin or microcrystalline waxes, AC 316A offers:
Superior wear and scratch resistance
Better dispersion in polymer systems
Improved surface finish and gloss control
Enhanced processing efficiency in extrusion and compounding
Its oxidized structure allows it to function as both a lubricant and a performance additive.
Plastics & Polymer Processing
PVC processing (internal & external lubrication)
Masterbatches and polymer compounding
Injection moulding and extrusion formulations
Coatings, Inks & Surface Treatments
Powder coatings
Printing inks
Industrial coatings and polishes
Slip and anti-blocking additives
Rubber & Industrial Applications
Rubber compounding
Release agents
Processing aids
Supplied in powder form for easy dispersion
Suitable for dry blending and melt processing
Compatible with a wide range of polymers and resins
Excel International supplies genuine Honeywell AC-series polyethylene waxes, including AC 316A, ensuring correct grade identification, consistent quality and dependable supply. We support buyers who require exact PE wax grades for industrial and formulation-critical applications.
Buyers choose us for:
Authentic Honeywell material
Stable batch quality
Bulk supply capability
Technical understanding of PE wax applications
Product Details:
| Type | HDPE Wax |
| Form | Powder |
| Melting Point | 105-110 °C |
| Country of Origin | Germany |
| Brand | BASF |
| Product Type | Luwax A Powder |
| Wax Category | Polyethylene (PE) wax (Non-oxidized / neutral grade) |
| Physical Form | Fine Powder |
| Appearance | White to off-white, free-flowing, uniform powder |
| Chemical Nature | Non-oxidized polyethylene wax, neutral chemistry (no intentional polarity) |
| Melting / Softening Behaviour | Medium to high softening PE wax, suitable for standard polymer processing temperatures |
| Density | Approx. 0.92 – 0.94 g/cm³ |
| Acid Value | Nil / negligible, suitable for non-polar and sensitive formulations |
| Hardness Characteristics | Medium hardness, provides effective lubrication without excessive stiffness |
| Slip & Surface Properties | Reduces coefficient of friction, Improves surface smoothness, enhances mar & abrasion resistanance |
| Dispersion Behaviour | Excellent dispersion in dry blends, polymer melts, coating and ink systems |
| Thermal Stability | Stable under normal extrusion, compounding and coating conditions |
| Compatibility | Compatible with PVC & polyolefin systems, paraffin wax & other PE waxes, resins, pigments and filler |
| Functional Role | Processing aid, Internal / external lubricant, Slip additive, Surface modifier |
BASF Luwax® A Powder is a high-purity polyethylene (PE) wax manufactured by BASF, specifically developed for applications requiring excellent lubrication, surface slip and processing efficiency. Supplied in fine powder form, this grade is widely used as a processing aid and performance additive across plastics, coatings, inks and industrial wax formulations.
Luwax® A Powder is a non-oxidized PE wax, known for its neutral chemistry, consistent particle size and reliable dispersion, making it suitable for formulations where chemical stability and predictable performance are critical.
This grade is preferred by industrial buyers for:
Effective internal and external lubrication in polymer processing
Reduction of friction and coefficient of friction (COF)
Improved surface smoothness and slip
Enhanced abrasion and mar resistance
Stable processing behaviour during extrusion, compounding and coating
Its powder form allows easy dosing, uniform mixing and fast incorporation into both dry blends and melt systems.
Plastics & Polymer Processing
PVC processing (internal & external lubrication)
Polyolefin processing
Polymer compounding and masterbatches
Injection moulding and extrusion
Coatings & Inks
Industrial and decorative coatings
Printing inks
Surface slip and wear-resistance additives
Wax Blending & Industrial Uses
Candle and wax blends (as a modifier)
Adhesives and sealants
Polishes and surface care products
Rubber and specialty industrial formulations
Supplied in fine powder form
Suitable for dry blending and melt processing
Compatible with PE waxes, paraffin waxes and common resin systems
Excel International supplies genuine BASF Luwax® grades, including Luwax® A Powder, ensuring authentic sourcing, consistent quality and dependable supply. We help buyers select the right PE wax grade based on application needs, not just datasheet values.
Buyers choose us for:
Authentic BASF material
Stable industrial-grade quality
Bulk availability at competitive prices
Application-level technical understanding
Contact Excel International today for pricing, availability and technical guidance on BASF Luwax® A Powder.
Request a quote now and optimise your processing performance.
Product Details:
| Type | Non-oxidized grade |
| Form | Flakes |
| Melting Point | 105-110 °C |
| Wax Category | Polyethylene (PE) wax (Non-oxidized grade) |
| Country Origin | Korea |
| Physical Form | Flakes |
| Physical Form | White Clean, uniform flakes free from visible impurities |
| Softening Temperature | 109 ± 2 °C Provides good thermal stability during processing |
| Number Average Molecular Weight (Mn) | Approx. 950 ± Ensures controlled melt flow and lubrication behaviour |
| Weight Average Molecular Weight (Mw) | Approx. 1650 ± Supports surface durability and abrasion resistance |
| Viscosity Profile (cps) | 160 °C: ~16.0, 150 °C: ~17.7, 140 °C: ~19.0, 130 °C: ~20.5, 120 °C: ~22.5 |
| Hardness Characteristics | Medium hardness Suitable for surface lubrication and wear resistance |
| Slip & Surface Properties | Reduces coefficient of friction (COF) Improves surface smoothness and mar resistance |
| Slip & Surface Properties | Good dispersion in polymer melts and coating systems, suitable for dry blending and melt processing |
| Compatible with | PVC & polyolefin systems, paraffin wax & microcrystalline wax, coatings, inks, resins, pigments, etc |
| Functional Role | Processing aid, lubricant, slip additive, surface modifier |
Polyethylene wax (Korea origin) is a high-quality PE wax supplied in flake form, developed for applications requiring controlled softening temperature, smooth flow behaviour and reliable surface performance. This grade is widely used as a processing aid, lubricant and surface modifier in plastics, coatings, inks and industrial wax formulations.
With its narrow molecular weight distribution and consistent viscosity profile, Korean polyethylene wax is preferred by manufacturers who need predictable processing behaviour and repeatable formulation results.
This grade offers a balanced combination of properties that make it suitable for performance-driven applications:
High softening temperature for thermal stability during processing
Controlled molecular weight (Mn / Mw) for uniform melt flow
Stable viscosity behaviour across a wide temperature range
Clean white appearance suitable for light-coloured formulations
Flake form for easy handling, dosing and dispersion
These characteristics make it ideal where surface quality, lubrication and processing efficiency are critical.
Polyethylene wax of Korean origin is valued for:
Effective internal and external lubrication
Reduction of coefficient of friction (COF)
Improved surface smoothness and abrasion resistance
Consistent dispersion in polymer and coating systems
Reliable flow control during extrusion and compounding
Its viscosity profile supports stable processing across different operating temperatures, reducing formulation variability.
Plastics & Polymer Processing
PVC processing (internal & external lubrication)
Polymer compounding and masterbatches
Injection moulding and extrusion
Coatings & Inks
Industrial and decorative coatings
Printing inks
Slip and surface-protection additives
Other Industrial Uses
Adhesives and sealants
Polishes and surface care products
Wax blending and industrial formulations
Supplied in flake form
Easy to store, handle and dose
Suitable for dry blending and melt processing
Compatible with paraffin wax, microcrystalline wax and other PE waxes
Excel International supplies carefully selected polyethylene wax from Korean origin, ensuring consistent quality, stable performance and dependable supply. We help buyers choose the right PE wax based on application needs and processing conditions, not generic descriptions.
Buyers choose us for:
Reliable Korean-origin material
Consistent batch quality
Bulk availability at competitive pricing
Practical understanding of PE wax applications
Contact Excel International today for pricing, technical details and bulk availability of Polyethylene Wax (Korea Origin).
Request a quote now and optimise your formulation performance.
Product Details:
| Type | Non-oxidized, broad molecular weight distribution |
| Form | Prills |
| Melting Point | 105-110 °C |
| Manufacturer / Brand | Marcus Oil & Chemical |
| CAS Number | 9002-88-4 |
| Wax Category | Polyethylene (PE) wax (Non-oxidized, broad molecular weight distribution) |
| Physical Form | Fine prills |
| Colour/Appearance | As per standard sample, clean uniform prills |
| DSC Peak Melting Point (ASTM D3418) | 95 ± 5 °C (Melting behaviour may vary slightly due to broad molecular weight distribution) |
| Mettler Drop Point (ASTM D3954) | 100 ± 5 °C |
| Needle Penetration @ 23 °C, 5 sec (ASTM D1321) | 3-8 dmm Indicates moderate hardness with flexibility |
| Viscosity @ 149 °C (ASTM D3236) | Maximum up to 100 cps, supports smooth flow and dispersion |
| Density (ASTM C693) | 0.91 -0.94 g/cm³ |
| Molecular Weight Distribution | Broad distribution Provides wider processing tolerance |
| Hardness & Surface Behaviour | Medium hardness, improves slip, lubrication and surface smoothness |
| Dispersion Behaviour | Good dispersion in polymer melts and coating systems, suitable for dry blending and melt processing |
| Compatibility | PVC & polyolefin systems Paraffin wax & microcrystalline wax Coatings, inks, resins, pigments filler |
| Functional Role | Processing aid, lubricant, slip additive, surface modifier |
Marcus PR-700 is a polyethylene (PE) wax supplied in fine prill form, developed for applications requiring controlled lubrication, smooth surface properties and reliable processing behaviour. Manufactured by Marcus Oil & Chemical, this grade is widely used as a processing aid, slip additive and surface modifier in plastics, coatings, inks and industrial wax formulations.
PR-700 is characterised by a broad molecular weight distribution, which provides balanced hardness, flexibility and melt behaviour, making it suitable for a wide range of processing conditions. Due to this molecular distribution, slight variation in melting behaviour is normal and acceptable within industrial usage.
Marcus PR-700 PE wax is valued for:
Moderate melting and drop point for easy incorporation
Controlled hardness with good flexibility
Effective internal and external lubrication
Improved surface slip and reduced friction
Stable viscosity behaviour at processing temperatures
Its prilled form allows uniform feeding, easy dosing and consistent dispersion in both dry blends and melt systems.
Compared to very narrow molecular weight PE waxes, PR-700:
Offers broader processing tolerance
Performs consistently across varying temperature conditions
Enhances surface smoothness without excessive stiffness
Supports reliable dispersion of fillers and pigments
This makes it suitable for general-purpose industrial formulations where processing robustness is important.
Plastics & Polymer Processing
PVC processing (internal & external lubrication)
Polymer compounding and masterbatches
Injection moulding and extrusion
Coatings & Inks
Industrial and decorative coatings
Printing inks
Slip, mar and abrasion-resistance additives
Other Industrial Uses
Adhesives and sealants
Polishes and surface care products
Industrial wax blends
Rubber compounding
Supplied in fine prill form
Easy to handle, store and dose
Suitable for dry blending and melt processing
Compatible with paraffin wax, microcrystalline wax and other PE waxes
Excel International supplies authentic Marcus PE wax grades, including PR-700, ensuring consistent quality, correct grade sourcing and dependable supply. We help buyers choose PE waxes based on processing needs and end-use performance, not just datasheet numbers.
Buyers choose us for:
Genuine Marcus material
Stable industrial-grade quality
Bulk availability at competitive pricing
Practical application-level support
Contact Excel International today for pricing, technical details and bulk supply of Marcus PR-700 PE Wax.
Request a quote now and streamline your processing performance.
Product Details:
| Type | LDPE Wax |
| Form | Fine powder or fine grain |
| Melting Point | 105-110 °C |
| Country of Origin | Germany |
| Brand | Clariant |
| Product Type | Licowax® PE 520 |
| Manufacturer / Brand | Clariant |
| Wax Category | Polyethylene / propylene copolymer wax (Non-polar PE wax) |
| Chemical Nature | Medium molecular weight PE/PP copolymer wax, neutral chemistry |
| Physical Form | Fine powder or fine grain (granules) |
| Appearance / Colour | White to off-white, free-flowing and uniform |
| Drop Point (ASTM D3954) | Approx. 120-125 °C Suitable for high-temperature polymer processing |
| Melting Behaviour | Medium-to-high softening PE wax, provides thermal stability during extrusion and compounding |
| Density | Approx. 0.93-0.95 g/cm³ |
| Acid Value | Nil / very low, indicates non-oxidized, non-polar structure |
| Hardness Characteristics | Medium hardness, balances lubrication with surface durability |
| Slip & Surface Performance | Reduces coefficient of friction, improves surface smoothness & gloss, etc |
| Excellent dispersion in | Polymer melts, dry blends, coatings and ink systems, effective pigment & filler wettings |
| Thermal & Colour Stability | Good heat stability, low tendency to yellowing during processing |
| Compatible with | PVC & polyolefin systems, masterbatch formulations, coatings, inks & adhesives, etc |
| Functional Role | External lubricant, processing aid, dispersing agent, surface modifier |
Licowax® PE 520 is a medium-molecular-weight, non-polar polyethylene/propylene copolymer wax from Clariant, supplied in fine powder or fine grain form. This engineered PE wax is designed for high-performance industrial applications where lubrication, dispersion, surface quality and processing stability are essential.
Licowax PE 520 is a versatile polyethylene wax additive that provides excellent anti-sticking properties, improved melt flow and superior surface finish in plastics, coatings, inks and other formulation systems. Its non-polar structure and medium molecular weight deliver smooth processing and enhanced final product characteristics.
Industrial buyers choose Licowax PE 520 because it delivers a combination of performance benefits:
Excellent anti-sticking and external lubrication in rigid PVC melt processing
Improved flow and processing ease for PE compounds
Effective dispersing agent for masterbatch systems with pigments and fillers
Superior rub and scratch resistance in coatings and inks
Good thermal and colour stability during processing
Smooth, glossy surface finish in end articles
The product is also FDA approved for certain applications, further increasing its suitability for regulated uses where quality and compliance matter.
Plastics & Polymer Processing
Rigid PVC extrusion (external lubricant)
PE masterbatch and functional masterbatch formulations
Polyolefin processing (flow improvement)
Coatings & Printing Inks
Industrial and decorative coatings
Printing ink additives for rub resistance and slip modification
Adhesives & Hot Melts
Hot-melt adhesives (viscosity control and set time adjustment)
Rubber & Elastomers
Mold release and external lubrication agents
Improved surface finish in elastomeric formulations
Licowax PE 520 can also be used as a matting agent in wood coatings and similar surface applications.
Licowax PE 520 is available in:
Fine powder
Fine grain / granules
Both forms are easy to incorporate into dry blends and melt systems for consistent dispersion and performance.
It is supplied in industrial packaging suitable for bulk handling in processing facilities and warehouses.
Excel International supplies genuine Clariant Licowax® PE 520, ensuring:
Authentic product quality supported by manufacturer’s specifications
Consistent performance in formulation and processing
Reliable bulk availability and competitive pricing
Technical application support tailored to your needs
Buyers choose us when they need industrial-grade wax additives with predictable processing behaviour and strong end-product performance.
Contact Excel International today for pricing, availability and technical support on Licowax® PE 520 (Clariant).
Request a quote now and optimise your formulation performance.